SUNYO / Chinese High Quality/ WZ30-25 Backhoe Loader with Famous Brand Engine and Transmission. Widely used, flexible operation
The Backhoe Loader WZ30-25:
WZ30-25 Backhoe loader, with YUCHAI YC4A105Z-T20 engine , power is100hp, chinese axle and Trans. With A/C, pilot control, Reversing video, hammer pipe , WZ30-25 Backhoe loader Operating weight7600kg, front bucket 1.2 m3, rated loading is 2.5tons. Rear digging bucket is 0.3 m3,
It can use for loading and digging, one machine has two functions. can help you to save much more cost. and can do many kinds work for building road, and so on.
It will bring you higher economic efficiency, Better profit income.
Main Performance Parameter of WZ30-25:
| Overall Operating Weight |
7640KG |
| Transport Dimension |
|
| mm L*W*H |
6170×2268×3760 |
| Wheel base |
2370mm |
| Min. Ground Clearance |
300mm |
| Bucket Capacity |
1.0m3 |
| Breakout Force |
38KN |
| Loading Lifting Capacity |
2500KG |
| Bucket Dumping Height |
2770mm |
| Bucket Dumping Distance |
925mm |
| Digging Depth |
27mm |
| Backhoe Capacity |
0.3m3 |
| Max. Digging Depth |
4082mm |
| Swing Angle of Excavator Grab |
190o |
| Max. Pulling Force |
39KN |
| Engine |
|
| Model |
YUCHAI YC4A105Z-T20 |
| Type |
In Line Direct injection Four-Stroke and Injection Combustion Chamber |
| Cylinder-Inside Diameter*Stroke |
4-108×132 |
| Rated Power |
75KW |
| Rated Speed |
2200r/min |
| Min. Fuel Consumption |
≤230g/km.h |
| Max.Torque |
≥400N.M/1500r/min |
| Displacement |
4.8L |
| Steering System |
|
| Model of Steering Device |
BZZ5-250 |
| Steering Angle |
±36 o |
| Min. turning radius |
5018mm |
| Pressure of the system |
14Mpa |
| Axle |
|
| Manufacturer |
Feicheng Axle Factory |
| Main Transmission Type |
Double Reduction |
| Final Reducer |
Single Stage Final Reducer |
| Rated Loader of Axle |
8.5t |
| Transmission System |
|
| Torque Converter |
|
| Model |
YJ280 |
| Type |
Single-stage Three Elements |
| Max. Efficiency |
84.40% |
| Inlet Pressure |
1.3Mpa-1.5 Mpa |
| Outlet Pressure |
0.25Mpa-0.3 Mpa |
| Cooling Method |
Oil-cooling Pressure Circulation |
| Gearbox |
|
| Type |
Fixed Shaft Power Transmission |
| Oil Pressure of Clutch |
1373Kpa-1569 Kpa |
| Gears |
Two Gears Ahead, Two Gears Astern |
| Max.Speed |
22Km/h |
| Tyre |
|
| Model |
16/70-20 |
| Pressure of Front wheel |
0.22 Mpa |
| Pressure of Back Wheel |
0.22 Mpa |
| Brake System |
|
| Service Brake |
Air Over Oil Caliper Brake |
| External Type |
| Self-regulation |
| Self-balance |
| Emergency Brake |
Operation Power Implementing brake
Manual Operation Power Terminating Brake |
| Hydraulic System |
|
| Digging Power of Excavator Grab |
46.5KN |
| Digging Power of Dipper |
31KN |
| Bucket Lifting Time |
5.4S |
| Bucket Lowering Time |
3.1S |
| Bucket Discharge Time |
2.0S |
Backhoe Loader:
the backhoe loader also called a loader backhoe,is a heavy equipment vehicle that consists of a tractor fitted with a bucket on the front and a backhoe on the back. Due to its small size and versatility, backhoe loaders are very common in urban engineering and small construction projects (such as building a small house, fixing urban roads, etc.) as well as developing countries. This type of machine is similar to and derived from what is now known as a TLB (Tractor-Loader-Backhoe), which is to say, an agricultural tractor fitted with a front loader and rear backhoe attachment.
Packing & Shipping:
We have been engaged in foreign trade for more than 18 years and have very rich experience in shipping. According to the past situation, each of our products is complete and delivered to customers as planned.
Generally, For the WZ30-25 Backhoe loader , one set need one 40H conainer, or two sets load into one 40H container and one 20 container. it also can load in the bulk ship, or Ro-on/Ro-off ship. it according your requirements
Attachments:
Our backhoe loader can be with some more attachements excapt the standard bucket. for exmple the 4 in 1 bucket, Quick Change, Fork, Auger, Hamer, Grass Grab, Wooden Fork, Snow blade, sweaper, Rops And so on.
Our Service :
Pre-sale service:
To our customers, before you buy the equipments, we hope to understand your needs, according to your machine requirements and your budget; choose the right model for you, to ensure that you buy high-quality products at a lower price.
At the same time, you are welcome to visit our factory in LINYI, China; we will book hotels, air tickets and take you up from air port.
After-sale service:
After the sale, we will properly arrange the transportation of the machine to ensure that the goods are safely delivered to your hands.
At the same time, we will provide you with technical support 24 hours a day, or send engineers to guide the installation and operation. If there are any quality problems with the machine, we will solve it for you in the first time.
Factory View:
Here show some factory pictures to help you understand our company.
Exhibition:
Here show you some exhibition pictures .
Certificate :
FAQ:
Q1: Which country do you export to?
Asia: Pakistan, Philippines, Thailand, Myanmar, Vietnam, Bangladesh, Kazakhstan, Turkmenistan, etc.
Middle East: Iran, UAE, Jordan, Oman, Saudi Arabia, Syria, etc.
Europe: Poland, Russia, Ukraine, Belarus, Bulgaria, etc.
Africa: South Africa,Kenya,Congo,Ethiopia,Nigeria,Ghana,Algeria,Senegal,Tunisia,etc.
South America: Paraguay, Colombia, Brazil, Peru, Chile, Cuba, Venezuela, etc.
Oceania: Australia, etc.
Q2: What is the proportion of your products export?
90% of our products are exported to all over the world.
Q3: What is the payment term?
We can discuss with you. Consider for long-term customers we are favorable payment terms TT, L/C, west union. It depends on the cooperation time, country and contract value.
Q4: What kind of logistic service do you supply?
FOB, CIF, C&F
Q5: What spare parts can you supply?
All kinds of spare parts of SUNYO JCM, SDLG, SHACMAN, SHANTUI, YTO, etc.
Audited Supplier 
){kind=link}